Download Seamless Swatches and CAD files
Download hi-res full sheets, seamless swatches and CAD files in bulk
Creative Vertical Solutions
Seratone® vertical solutions consist of a range of pre-finished panels and jointing options setting the tone for inspiring and creative designs for both commercial and residential interiors and providing wall and ceiling panel solutions for over 30 years.
Where to Buy
Seratone is available for purchase at your local PlaceMakers, Bunnings, ITM, Carters, Buildlink and Mitre10. Please call ahead to confirm availability.
Explore the Range
Seratone is available in a range of profiles suitable for areas where hygienic, low maintenance surfaces are required.
Four aluminium jointer profiles have been developed by Laminex New Zealand™ to stylishly integrate joins and minimise areas where mould and grime could gather. Seratone® Jointers have been anodized or colour matched to complement each other giving you design combinations in any way you choose.
- Anodised and colour matched aluminium jointing options
- Antimicrobial
- Mosaic or three dimensional effects (overlays and combinations with other finishes)
- Seratone® in aluminium frames for sliding doors, office partitioning and furniture.
Seratone FAQs
What is Seratone?
Seratone® is a range of pre-finished decorative wall and ceiling lining panels which can used in wet and dry areas for both commercial and residential interiors.
How long has Seratone been in the market?
For over 30 years.
Can you use Seratone in a shower?
Yes, all the entire Seratone range is tested and approved for use in both shower zones and wet area rooms.
Is Seratone waterproof?
Our Seratone Classic and Seratone Speciality ranges have a water resistant UV cured paint coating which makes them impervious to water. Seratone Aqua is made from layers of kraft paper impregnated with resin which is formed under high pressure and heat, making it impervious to water throughout the panel thickness.
How do you install Seratone?
Seratone is installed using a combination of adhesive and double sided foam type using jointers and or silicon sealant between panels. Please refer to the Seratone Technical Information Manual for comprehensive, step-by-step guidelines.
What is Seratone made of?
Seratone Classic and Seratone Speciality are made using a tempered hardboard substrate with a UV cured paint applied to the panel face. Seratone Aqua is made from layers of kraft paper impregnated with resin which is formed under high pressure and heat.
How do you clean Seratone?
Seratone is easily cleaned with a range of readily available non-abrasive household cleaning products. Please refer to the Care and Maintenance found in either the Seratone Brochureor Seratone Technical Information Manual. Do not use scouring pads, abrasive cloths or cream cleaners.
Can Seratone Classic & Seratone Specialty be used with Seratone Aqua?
Yes. All sheets are 4.5mm thick. You can also use the same jointers as well.
What are the jointers made out of – and what are the colours?
Jointers are made from aluminium and colour matched to complement a given décor.
Are tile patterns easy to align?
Some sheets may require trimming to align pattern. When installing the Herringbone Tile, careful planning and cutting is required. Refer to Technical Installation Manual for guidance.
If sheet is slightly bowed, how can I stop it “popping” when curing ?
Use some timber props for bracing while adhesive cures.
How is Seratone Aqua made?
Layers of Kraft Paper are soaked in resin – then pressed together at high pressure and temperature (thermosetting process).
